- Mon – Sat 8:00 – 18:00, Sunday-CLOSED
Dual heating
The InkOne SwapPress PT4 Dual (38x38 cm) heats from both sides, with independent temperature control on each plate.
Automatic opening
The PT4 Dual's automatic opening system opens and closes the upper plate on its own, using gas springs, so you don't have to hold its weight.
Effortless pressure
The force multiplier arm reduces the effort needed to close the press, and the real-time pressure indicator lets you check the setting without stopping the process.
InkOne SwapPress PT4 Dual
The InkOne SwapPress PT4 Dual, with a 38×38 cm print area, is a machine designed for customisation workshops and intensive production looking to reduce pressing times without losing precision in every batch.
- Thanks to the independent control of each plate, you can print designs on both sides of the product in a single operation.
- The lower plate slides out, so you can position the product without getting close to the hot upper plate.
- It includes an emergency stop switch, to stop pressing immediately if necessary.
- It accepts materials up to 15 mm thick, allowing you to work with rigid materials such as wood, slate or metal plates, as well as textiles.
- Pressing time is set between 0 and 999 seconds, so the press opens on its own once each batch is done.
- The pressure is adjusted with an adjustable wheel, with no tools required.
- Temperature can be adjusted up to 225°C, to work with different marking techniques — sublimation, DTF, textile vinyl — and different materials.
INTRODUCTION
InkOne SwapPress PT4 Dual
InkOne SwapPress Transfer Presses
Frequently Asked Questions
The InkOne SwapPress PT4 Dual is designed for customisation workshops and intensive production that need to reduce pressing times without losing precision. Its dual heating plate heats the product on both sides at once, with independent temperature and time control on each plate, giving a more even result than a single-plate press.
The PT4 Dual accepts t-shirts and other textile products, cushions, towels, metal plates, wood, slate and cardboard, among other materials. Its maximum thickness of 15 mm lets you work with both thin garments and rigid materials, which need even heating on both sides to avoid warping during pressing.
In a single-plate transfer press, only the upper plate provides heat, while the base stays cold or passive, which can create temperature differences between the two sides of the product. The InkOne SwapPress PT4 Dual heats from both top and bottom at once, with independent control on each plate, giving a more even result throughout the material.
The InkOne SwapPress PT4 Dual is aimed at customisation workshops and businesses with intensive production, especially those working with rigid materials or needing to print both sides of a product in a single operation, such as commemorative plaques, puzzles or pieces with different designs on each side.
Yes, especially for workshops working with rigid materials or double-sided pieces, where a single-plate press requires more pressing time or extra passes to avoid warping. By reducing the time per batch and avoiding the need to flip the product, the PT4 Dual helps increase production without adding staff or extra shifts.
Maintenance on the PT4 Dual is simple: periodically check the condition of both heating plates and their independent controllers, check the pressure wheel adjustment, and clean the work surface regularly. As it doesn't include interchangeable plates, it doesn't require the adjustment tasks associated with that system.
