Two in one
The Heat Press for Balls InkOne B1 is a 2-in-1 press with a ring-shaped base for large balls of 18 to 24 cm and a tubular adapter for small balls of 6 to 7 cm.
Perfect fit
Curved 8.5 x 15 cm heating plate that conforms to the sphere and delivers heat and pressure evenly across the surface of the ball.
Control and convenience
LCD touchscreen to set temperature and time, with audible alerts and automatic opening: the same conditions on every piece and less effort.
Heat Press for Balls InkOne B1
- The support base is height-adjustable, allowing it to adapt to the size of each ball.
- The semi-automatic system combines manual closing with a lever and automatic opening through an electromagnet and gas spring, which opens the press when the time is up.
- The wide temperature (up to 250 °C) and time (up to 999 s) ranges make it possible to adjust the process to the material and the transfer technique.
- It lets you customise footballs, basketballs and volleyballs as well as tennis balls, padel balls and baseballs, covering different sports with one machine.
- It is ideal for sports merchandising for clubs, schools and teams, for tournament souvenirs and gifts, and for on-demand production of customised sports items.









Technical Specifications | Heat Press for Balls InkOne B1 |
|---|---|
Type of press | For balls |
Heating plate | Curved, 8.5 x 15 cm, with Teflon coating |
Support base | Ring-shaped, for balls of 18 to 24 cm in diameter |
Base height | Adjustable |
Adapter for small balls | Tubular, for balls of 6 to 7 cm in diameter (included) |
Controller | LCD touchscreen for temperature and time |
Temperature range | 0 - 250 °C |
Temperature accuracy | ±5 °C |
Time range | 0 - 999 seconds |
Operating mode | Semi-automatic: manual closing and automatic opening |
Opening | Electromagnet with gas spring |
Power | 300 W |
Voltage | 220 V (50 Hz) |
Machine dimensions | 50 x 27 x 53 cm |
Net weight | 11.7 kg |
Warranty | 1 year |
INTRODUCTION
Heat Press for Balls InkOne B1
Frequently Asked Questions
The Heat Press for Balls InkOne B1 features a curved 8.5 x 15 cm heating plate with a Teflon coating that conforms to the spherical surface. A conventional flat heat press is not designed for such shapes, whereas this one delivers heat and pressure evenly across the transfer area of the ball.
The ring-shaped base is used to customise large balls of 18 to 24 cm in diameter, such as footballs, basketballs and volleyballs, and the tubular adapter takes small balls of 6 to 7 cm, such as tennis balls, padel balls and baseballs. Both accessories are included with the press, and the height of the base is adjustable to suit the size of each ball.
The Heat Press for Balls InkOne B1 works with sublimation, DTF, UV-DTF and other heat transfer techniques. The right technique depends on the material of each ball, and it is advisable to run tests before starting a full production run.
The temperature and time are set on the touchscreen and, when an audible alert signals that the temperature has been reached, the ball is placed on its base with the material to be transferred and the lever is lowered. When the time is up, a new alert sounds and the lever lifts automatically thanks to the electromagnet and gas spring.
To apply DTF on footballs or volleyballs with the Heat Press for Balls InkOne B1, the recommended reference settings are around 15 seconds, a temperature of 165 to 170 °C and medium pressure. These are approximate, guideline values that may vary depending on the material of each ball, so it is advisable to run tests first.
It is suitable for entrepreneurs and customisation workshops offering sports merchandising for clubs, schools and teams, souvenirs and gifts for tournaments and sporting events, or on-demand production of customised balls. With programmable temperature and time, every piece receives the same conditions in repeat runs.



